---
title: "Chemical Pump Selection Guide: Materials, Seals &amp; Standards"
date: 2026-09-23T06:52:05Z
modified: 2026-10-10T08:07:17Z
permalink: "https://www.defucc.com/blog/buying-guide/chemical-pump-selection-materials-seals-standards/"
type: post
status: publish
excerpt: ""
wpid: 3020
categories:
  - buying guide
featured_image: "https://www.defucc.com/wp-content/uploads/2026/10/image2.jpg"
featured_image_alt: chemical pump selection guide
timestamp: 2026-10-10T08:07:17Z
tags:
  - buying guide
---

## **Quick Answer**

Chemical pump selection starts with the liquid you need to move. Its chemistry and temperature help determine the wetted materials, while flow requirements and fluid properties help narrow down the pump type. DEFUCC manufactures fluoroplastic-lined centrifugal and diaphragm pumps for chemical-transfer applications.

## **What Should You Know About the Fluid?**

You should know exactly what you’re pumping and how it behaves during operation. Begin with the chemical and its concentration, since acids and salt solutions can require different wetted materials. Then check the normal and maximum operating temperatures because material compatibility can change with temperature.

High viscosity can reduce a centrifugal pump’s performance. If the liquid contains suspended solids, you may need a larger passage to prevent clogging. Abrasive particles can increase wear as well.

For a centrifugal pump, establish the required flow and head before checking whether the suction conditions provide enough available NPSH. Specific gravity affects the power required to pump the liquid. Vapor pressure also needs to be considered when determining available NPSH.

**Which Chemical Pump Materials Should You Choose?**

Choose chemical pump materials based on the liquid at its actual concentration and operating temperature. The material also needs to handle the mechanical demands of the application.



| **Material** | **Where it may fit** |
| --- | --- |
| **SS316/316L** | Used with many process fluids when the specific chemical and conditions are compatible. |
| **Duplex stainless steel** | Offers higher strength and improved resistance to some forms of chloride corrosion compared with common 300-series stainless steels. |
| **Hastelloy/nickel alloys** | Available in different grades for demanding corrosive services where less resistant alloys may not be suitable. |
| **Fluoropolymers** | Offer broad chemical resistance but still need to be checked against temperature and mechanical demands. |

A corrosion resistant pump can also combine materials rather than use the same material throughout.

For example, our [IHF chemical centrifugal pump](https://www.defucc.com/product/ihf-chemical-centrifugal/) has a metal pump body lined with FEP (F46). Its impeller and pump cover use metal inserts with fluoroplastic construction. The process liquid therefore contacts fluoroplastic surfaces while the metal provides the outer structure.

## **Which Sealing or Containment Design Should You Choose?**

[![IHF Chemical Centrifugal Pump](https://www.defucc.com/wp-content/uploads/2026/10/1产品.jpg)

](https://www.defucc.com/product/ihf-chemical-centrifugal-catalog/)

The choice depends on the pump design and how the process liquid needs to be contained.

A mechanically sealed centrifugal pump has a rotating shaft entering the pump and uses a mechanical seal around it. The seal materials need to suit the chemical and operating conditions.

Our IHF pump uses an external mechanical seal. Its stationary ring is made from 99.9% alumina ceramic or silicon carbide, while the dynamic ring uses PTFE stuffing material.

A magnetic-drive pump works differently. Torque is transferred magnetically without a conventional shaft passing through the containment boundary, removing the traditional dynamic shaft seal.

That can be useful when avoiding leakage through a dynamic shaft seal is an important requirement, although the containment materials still need to suit the chemical.

A diaphragm pump uses flexible diaphragms to displace the liquid. There is no rotating shaft seal in contact with the process fluid. Material selection still matters because the diaphragm and other wetted parts must be compatible with the liquid. Our guide to [diaphragm pump materials](https://www.defucc.com/wp-content/uploads/wp-mfa-exports/post/diaphragm-pump-materials-chemical-applications.md) covers the available material options in more detail.

## **Which Pump Type Fits Your Duty?**

A [chemical centrifugal pump](https://www.defucc.com/wp-content/uploads/wp-mfa-exports/post/diaphragm-pump-vs-centrifugal-pump-industrial-needs.md) typically suits continuous transfer of lower-viscosity liquids. The required flow and head still need to be delivered by the pump at the intended operating point.

[![AOK Series Air Diaphragm Pump](https://www.defucc.com/wp-content/uploads/2026/10/1产品2.jpg)

](https://www.defucc.com/product/aok-series-air-diaphragm-pump/)

For fluids containing solids or thicker fluids, a diaphragm pump can be a better option. Based on their design, some diaphragm pumps can also run dry and self-prime.

DEFUCC uses both centrifugal and air-operated diaphragm pumps in [chemical applications](https://www.defucc.com/wp-content/uploads/wp-mfa-exports/page/chemical-pump.md) such as petrochemical refining and wastewater treatment. Our AOK series pump, for example, is available with PP, PVDF, SS304, and SS316 bodies. Diaphragm options include PTFE, Santoprene, Buna-N, and Viton.

DEFUCC’s largest AOK model can pass solids up to 9.4 mm, making solids size an important specification to check when selecting a diaphragm pump.

If you’re comparing diaphragm pump drive methods, our [AODD vs. EODD guide](https://www.defucc.com/wp-content/uploads/wp-mfa-exports/post/aodd-vs-eodd-choose-right-diaphragm-pump.md) explains the differences between air-operated and electric-operated designs.

## **Which Chemical Pump Standard Should You Specify?**


The standard you should specify depends on the pump and project. For instance, ISO 2858 is used to specify nominal duty points and principal dimensions for certain end-suction centrifugal pumps. Horizontal end-suction centrifugal pumps for chemical process service are covered by ASME B73.1.

For sealless horizontal end-suction centrifugal pumps for chemical process service, ASME B73.3 is typically applied. API 610 covers centrifugal pumps used in the natural gas and petrochemical industries.

Instead of determining whether a material can resist a particular chemical, these standards address pump design and dimensions, plus service requirements. Make sure to check chemical compatibility separately against the actual process conditions before selecting the pump.

## **What Information Should You Give Your Pump Supplier?**


Give your supplier the process information you’ve gathered rather than asking for a pump based only on the chemical name. Include any project-specific requirements that haven’t already been covered, such as a required material or pump standard.

If operating conditions vary, point that out as well. The supplier can then check the proposed pump’s wetted construction and performance against the actual service rather than a single operating point.

## **FAQs**

### **Can I choose a chemical pump from a chemical-resistance chart?**

A compatibility chart can help you screen possible materials, but it cannot select the complete pump. You still need to consider the operating conditions and required pump performance.

### **Does a corrosion resistant pump need a mechanical seal?**

Not necessarily. Mechanically sealed centrifugal, magnetic-drive, and diaphragm pumps contain the process liquid in different ways. The appropriate design depends on the fluid and application.

### **What is the difference between a chemical pump and a water pump?**

A chemical pump uses wetted materials and a containment or sealing design selected for the chemicals it handles. A standard water pump should not be assumed suitable for corrosive service without checking its construction.

[Get Free Quote](https://www.defucc.com/wp-content/uploads/wp-mfa-exports/page/contact.md)



Welcome to Our Blog!
Professional Dewatering Pump Manufacturer

 Written by the Engineering & Solutions Team at WENZHOU DEFU MACHINERY CO., LTD. Backed by 3 manufacturing bases and over 10 years of expertise as a leading dewatering pump manufacturer, our team is dedicated to sharing practical dewatering pump insights and engineered fluid handling solutions for global projects.

 [ Contact Us → ](https://www.defucc.com/wp-content/uploads/wp-mfa-exports/page/contact.md) 

 ![WENZHOU DEFU MACHINERY CO., LTD. - Dewatering Pump Manufacturer](https://defucc.b-cdn.net/wp-content/uploads/2025/06/2-1-1--768x534.jpg)